- CCTV
-
Alarm systems
- Mini Alarms
- Wireless alarm systems
- GSM
- Alarm panels
- PIR detectors
- Dual detectors PIR+MW
- Glass break detectors
- Magnetic contacts
- Seismic detectors
- Water leakage detector
- Gas leak detectors
- Temperature detector
- Firealarm detectors
- Perimeter security
- Remote control sets
- Accessories
- Acoustic, optical signaling devices
- Alarm cables
- Access control
- Intercom systems
- Fire safety systems
- Videodoorphones, doorphones and intercoms
- Electric gate automation systems and barriers
- Networking
- Sound systems
- Switching and Server Cabinets, accessories
- Tools and accessories
- Cables covers and accessories
- Power supply and accumulators
- HDMI
- Accessories for caravans and campers
- Wiring
- Solar energy
- Wind energy
- Contacts
RPT1 - Wireless Repeater Module
Features
• Built-in transceiver (433MHz or 868MHz)
• Allows to extend the range of wireless communications
• Supports all MAGELLAN transmitters
• Select which zone, PGM and/or keypad signals are repeated
• Signal strength display
• Universal transmitter input (N.O./N.C.)
• In-field firmware upgrade via 307USB
• Wireless range in a typical residential environment:
- 75m (240ft) with 433MHz;
- 50m (160ft) with 868MHz
• AC input (16Vac, 20VA)
• Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes
• Compatible with MG5000 / MG5050 / MG5075 / RTX3
Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.
• Built-in transceiver (433MHz or 868MHz)
• Allows to extend the range of wireless communications
• Supports all MAGELLAN transmitters
• Select which zone, PGM and/or keypad signals are repeated
• Signal strength display
• Universal transmitter input (N.O./N.C.)
• In-field firmware upgrade via 307USB
• Wireless range in a typical residential environment:
- 75m (240ft) with 433MHz;
- 50m (160ft) with 868MHz
• AC input (16Vac, 20VA)
• Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes
• Compatible with MG5000 / MG5050 / MG5075 / RTX3
Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.
Support: |
PARADOX MAGELLAN |
Frequency band: |
433 MHz |
Inputs: |
1 pcs NO/NC - wire |
Outputs: |
1 pcs - Relay : 5 A, 60 V DC / 120 V AC (max) |
Wireless transmission range: |
75 m (indoor / open area) |
Power supply: |
16 V AC / 20 VA |
Current consumption: |
65 mA |
Emergency power supply: |
Battery : 12 V / 5 Ah |
Operation temp: |
0 °C ... 50 °C |
Weight: |
0.84 kg |
Dimensions: |
140 x 76 mm |