- CCTV
-
Alarm systems
- Mini Alarms
- Wireless alarm systems
- GSM
- Alarm panels
- PIR detectors
- Dual detectors PIR+MW
- Glass break detectors
- Magnetic contacts
- Seismic detectors
- Water leakage detector
- Gas leak detectors
- Temperature detector
- Firealarm detectors
- Perimeter security
- Remote control sets
- Accessories
- Acoustic, optical signaling devices
- Alarm cables
- Access control
- Intercom systems
- Fire safety systems
- Videodoorphones, doorphones and intercoms
- Electric gate automation systems and barriers
- Networking
- Sound systems
- Switching and Server Cabinets, accessories
- Tools and accessories
- Cables covers and accessories
- Power supply and accumulators
- HDMI
- Accessories for caravans and campers
- Wiring
- Solar energy
- Wind energy
- Contacts
PG8926 - Wireless Smoke Detector
• Power supply: 3V CR123A battery (Batery life time - 3 years)
• Siren: Built-in 85 dB
• Operating frequency: 868 MHz
|
Model |
PG-8926 |
|
Detector Type |
Photoelectric |
|
Alarm Sound |
85dB at 3m |
|
Cover Range |
50-100 cubic meters |
|
Power Source |
3V CR123A lithium batteries or CR17450 batteries, life expectancy – 3 years |
|
Current Drain |
22 µA standby, 200mA max in operation |
|
Smoke Density |
0.09 – 0.14 dB/m |
|
LED Switch |
LED enable (red LED lights for 2 sec upon alarm detection) |
|
Frequency Band |
868 MHz |
|
Communication Protocol |
PowerG / Tamper alert reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored |
|
Alarm Report |
In the alarm condition, the detector sends the alarm event to the control panel. When the alarm condition is restored, the detector sends an alarm restore indication (red LED blinks once per secons) |
|
Battery Supervision |
Automatic transmission of battery status data as part of any transmitted message |
|
Operating Temperature |
From -10°C to +55° C (RH up to 93%) |
|
Dimensions |
120 x 58 mm |
