alarm systems, cctv systems, access control, doorphone systems, PA systems, fire systems, ip camera. Inverters. Solar panels. solar controllers. Batteries. Surge Protectors. Emergency power sources. Charging device.

Model

FLR100

Power Supply Voltage

10.8 – 26.8 Vdc

Consumption in Idle @ 24 Vdc (Tx, Rx, Tx/Rx)

55 mA, 45 mA, 55 mA

Consumption in Idle @ 12 Vdc (Tx, Rx, Tx/Rx)

45 mA, 35 mA, 45 mA

Consumption in Alarm @ 24 Vdc (Rx, Tx/Rx)

50 mA, 60 mA

Consumption in Alarm @ 12 Vdc (Rx, Tx/Rx)

40 mA, 50 mA

Consumption in Fault @ 24 Vdc (Rx, Tx/Rx)

35 mA, 45 mA

Consumption in Fault @ 12 Vdc (Rx, Tx/Rx)

30 mA, 40 mA

Pre-Alarm Obscuration Thresholds

20%, 25%, 30%, 35%

Alarm Obscuration Threshold

35%

Minimum Operating Distance

5 m

Maximum Operating Distance

150 m (separate Tx and Rx) / 100 m (Tx/Rx and passive reflector)

Wavelenght of the Transmitter Beam

890 nm

Tolerance to the Beam Misalignment (separate Tx and Rx)

± 1°

Tolerance to the Beam Misalignment (TxRx unit and passive reflector)

± 0.5° ; ± 5°

Pre-Alarm Relay

1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper

Alarm Relay

1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper

Fault Relay

1A. 30Vdc resistive load – NO/NC contact. Selectable via jumper

Conventional Detection Circuit – Input Voltage Range

10 – 20 Vdc

Conventional Detection Circuit – Consumption in Pre-Alarm Condition

20 mA @ 20 Vdc

Conventional Detection Circuit – Consumption in Alarm Condition

40 mA @ 20 Vdc

Conventional Detection Circuit – Reset Pulse Duration

200 ms

Operating Temperature

From -10°C - 55°C

Relative Humidity

95%

Protection Grade

IP55

Passive Reflector Dimensions

10 x 10 cm / 20 x 20 cm / 30 x 20 cm

Dimensions

248 x 122 x 120 mm

Weight

900 g